SpecOPS Finder MK4
Life Detection Radar at a glance
MK4 Software and Human Interaction Design Concepts
The MK4 operates on the most popular operating systems used today. Android, iOS, Linux, Mac OS and Windows devices to name a few. A simple downloaded connects the user to the device. The user interface has been designed to allow critical information to be found quickly. MK4 uses HCI “Human Interaction Concepts,” used in the aviation industry. This allows its user to focus on their mission and spend less time looking down.
This man portable package is controlled remotely by using an on board encrypted wireless router up to 200 ft (60 m) away. Additionally, operating and monitoring the system can be accomplished by using the MK4 as an IoT device. Its IP Address and MAC ID can be added to modern radio networks that handle data.
The Finder MK4 is also vehicle or ground robot mountable. This system weigh in at 8 lbs (3.6 kg). Finder is powered by a 12v 10 amp SLA style battery. This power source provides up to 12 hours of standby time and up to 150 scans with a full charge.
The MK4 is radar technology was created to detect signs of life. Every part of this system from designing circuit boards, software engineering, algorithms hardware and even the framework that holds it all together.
By using this modern approach, a synergy is created between the user and the technology.
These concepts combined with colour coding used in FAA Air Traffic Control displays, add to the synergy between the user and the device.
A large annunciator HUD is located at the top most area of the user interface. This allows the user to quickly glance down to observe all the critical information in less than three seconds. Software updates will continually add new function to this system.
Generation IV - Model: MK4-100-00A1
- System Type : Low Emitting Microwave Radar
- Radar Type : Frequency Modulated Continuous Wave Radar (FMCW)
- Radar Antenna Array : 6160 – T651 Aluminum Alloy CNC Formed Chassis & Cover Plate.
- Beam Width/Height : Elevation 35 deg, Azimuth 70 deg.
- Operating Wavelength : 3.15 GHz
- Radioactivity : ICNIRP-1998 radiation exposure requirements compliant
- Exterior Ethernet Port
- Camera System : 2.0 Megapixel HD 1080p, 120 fps, automatic Night infrared switching.
- WiFi : IEEE 802.11ac b/g/n [Wavelength Ranges 2.4 GHz, 5 GHz]
- Power Supply : Charging system: 4-Cell, 2.8A @ 12.8V LiFePO4 Charger [110 – 240V]
- Battery : LiFePO4 13.2V 5sh, 66Wh
- Scans Per Charge : Up to 150 Scans
- Standby Time : 12 Hours when remote sensor is left in the ON position.
- Length of Scan : Approx. 1 Minute: 10 seconds
- Target Types : Heart Rate, Respiration and Human Gross Movement Profiles
- Display : System runs on common smart phone, laptop or tablet
- Scanning Mass Types : Common construction materials
- Clear Air Range Operation Range : 200ft (60m)
- Temperature Range : -84° To +240°F [-64°C to +115°C]
- Display : System runs on common smart phone, laptop or tablet
- MK4 Remote Sensor Weight : 8 Lbs (3.6Kg.)
- MK4 Remote Sensor Dimensions : 14.9 x 12.13 x 9.58″ [37.85 x 30.81 x 24.33cm]